© 2011 Runway Sewing. All Rights Reserved.
I used the sheer jersey chemise from american apparel to make this cute top but you can use any tank top you like that has skinny shoulder straps. Just make your own version. I think this the simplest project yet! No cutting or even sewing experience required!
Here's how you do it!
Material:
1.) Tank top with skinny straps
2.) thread
3.) pins
4.) scissors
5.) measuring tape
6.) sewing machine (not required)
7.) metallic trim same width as your tank straps.
Duration: 30min to 1 hour
Sewing Level: Easy
1. Take the measuring tape and measure the full length of front / back neck and shoulder straps continuously. Then figure out how long you want the bow tie length to be as well. Roughly you will need about 1 1/2 yards.
2. For this project, I bought a 1/4" (same width as the shoulder straps) braided metallic trim at the fabric store.
3. Pin the trim around the neck and shoulder straps. The ends will be the front tie. The trim should be one continuous piece.
4. The end of the ties can simple be tied in a knot so it does not fray.
You have just made your plain tank top into a fancy going out top, wear with jeans or even lingerie you can wear to bed! Very versatile! Enjoy!
DIY Inspiration on How to design and make your own Fashion Clothing, Accessories and Jewelry!
1/29/11
PROJECT #4: THE JEWEL REVERSIBLE NECK T
© 2011 Runway Sewing. All Rights Reserved.
I used the sheer jersey 2 sided T shirt from american apparel to make this "Jewel" top but you can use any T shirt you like. Just make your own version. This T shirt has a reversible neck. One side is high and the other side is low. If you want to cut lower for a deeper front neck drop or to show your sexy back, just cut lower. If you like the T shirt as is, you don't even need scissors for this project!
Here's how you do it!
Material:
1.) Short sleeve T shirt
2.) thread
3.) pins
4.) needle
5.) scissors
6.) measuring tape
7.) sewing machine (not required)
8.) 1/2" sequin & metallic trim.
Duration: 30 min to 1 hour.
Sewing Level: Easy
1. Measure around the full neck line & armhole/sleeve opening to figure out how much trim you will need to buy. Roughly you will need about 1 yard or more.
2. For this project, I bought a 1/2" sequin embellished trim at the fabric store.
3. Pin the trim around the neck and armhole/sleeve opening then hand or machine sew.
4. When you get to the end, fold the trim under and sew down so the trim does not fray.
How easy was that!!!
I used the sheer jersey 2 sided T shirt from american apparel to make this "Jewel" top but you can use any T shirt you like. Just make your own version. This T shirt has a reversible neck. One side is high and the other side is low. If you want to cut lower for a deeper front neck drop or to show your sexy back, just cut lower. If you like the T shirt as is, you don't even need scissors for this project!
Here's how you do it!
Material:
1.) Short sleeve T shirt
2.) thread
3.) pins
4.) needle
5.) scissors
6.) measuring tape
7.) sewing machine (not required)
8.) 1/2" sequin & metallic trim.
Duration: 30 min to 1 hour.
Sewing Level: Easy
1. Measure around the full neck line & armhole/sleeve opening to figure out how much trim you will need to buy. Roughly you will need about 1 yard or more.
2. For this project, I bought a 1/2" sequin embellished trim at the fabric store.
3. Pin the trim around the neck and armhole/sleeve opening then hand or machine sew.
4. When you get to the end, fold the trim under and sew down so the trim does not fray.
How easy was that!!!
Subscribe to:
Posts (Atom)






