1/12/12

PROJECT #13: THE COLD SHOULDER T

© 2012 Runway Sewing. All Rights Reserved.
 

This is the easiest T shirt project. Saw an anthropologie sweater and simplified it by making a cut out T shirt in just 15 minutes. All you need is a scissor and a tape measurer! 



Pin the points marked in red or use washable chalk directly on the T shirt for the cut out areas. Make sure to cut right next to the armhole seam of the sleeve so there is minimal stretching. You can determine the front neck drop length based on how low or high you want the neck to be. For this sample pictured, the width of the straps equal 2" on each side and the neck drop was 6" down from HPS (neck and shoulder seam point). The front and back are cut out the same at shoulders. The back neck drop is only 1/2" from HPS and the sleeve length was cut to make 3/4 length.

Experiment and make your own cut out T shirt design!

1 comment:

  1. Great site! I am loving it!! Will be back later to read some more.this is work is tremendous. Thank
    fit and flare black dress

    ReplyDelete